The working principle of the waste incinerator

(waste incinerator)Garbage is fully burned in three stages: drying, combustion and burnout at a high temperature of 850-1000 ℃. Through the computer automatic control system and automatic combustion control system, the combustion condition of garbage in the furnace can be monitored and adjusted immediately, and the operation speed of grate and the amount of combustion air can be adjusted in time. These measures can ensure that waste disposal is always in a controllable state. In order to make full use of the heat energy, the heat in the waste incineration process is exchanged in the waste heat boiler to generate superheated steam, which promotes the steam turbine generator unit to generate electric energy, which is transmitted to all places through the power grid, realizing the recycling of waste treatment.

(waste incinerator)The flue gas generated in the incineration process can only be discharged after being treated by special equipment. Lime, activated carbon and other substances can be added to adsorb and purify the flue gas. Generally, the tail gas purification is to treat the flue gas; In the process of waste storage before treatment, sewage will also seep out. These sewage should also be treated through advanced technology, biochemistry, filtration and purification, so that the treated sewage can be reused and directly recycled for reproduction. Through the treatment of pollutants such as waste gas and wastewater, the harmless waste treatment is realized.The volume reduction rate after waste incineration is very high, which can reduce the waste volume by 80% - 90%, and realize the reduction of waste treatment.